Doheny’s Advantage Ultra Inground Robotic Cleaner Powered By Dolphin

Get crystal-clear cleaning results and proven reliability with the exceptional features and patented technology of Doheny’s Advantage Ultra. The PowerStream Mobility System works with CleverClean™ Pool Coverage to enhance navigation for complete cleaning coverage, including walls, floor and waterline. The active brush rotates and combines with the back brush to enhance removal of algae and debris. Easy-Clean filtration offers no-mess top access. Fast, debris-free water release makes removing the Advantage Ultra from the pool easy. LED light indicator stays on while cleaning. Features 2-hour cycle time and effortless operation with the Energy-Saver Power Supply’s simple touch-screen control and weekly timer. 60 ft cable. Recommended for pools up to 50 ft in length. 2 years limited warranty.

Tip 1:
How long can I leave my Dolphin in the pool?
We recommend taking your Dolphin out of the pool after each use to empty and rinse the filters and to rinse off any excess chemicals. It is ideal to keep your Dolphin out of the pool and stored away when not in use. If your Dolphin has a weekly scheduler, you can keep it in your pool for a week, but you will need to make sure the filter is cleaned.

Tip 2:
How to take the robot out of the pool:
Gently pull on the blue floating cable to bring your Dolphin to the edge of the pool. Once your Dolphin is in reach, grasp the handle to pull the robot out of the water. Place the robot on the edge of the pool to let the remaining water drain out. Do not pull the Dolphin out of the water using the blue floating cable.

Tip 3:
How to clean the filters:
Cleaning the filters are simple. Just remove the filter(s) from the robot, release the latch to let the dirt and debris fall out, and then hose off any remaining debris. Do not let the filters dry out before cleaning them. Clogged filters reduce the effectiveness of the cleaning. We suggest cleaning your filters after every use.

Tip 4:
How to setup the power supply:
Important Reminder: The power supply for your Dolphin is not waterproof- it is water resistant. Keep protected from the elements. Make sure the power supply is placed at least 10 feet from the edge of the pool. Connect the blue floating cable to the power supply, align the connector with the notch of the plug on the power supply, then turn clockwise. Press the power button on the power supply to begin cleaning. When in use, make sure the power supply is either stored on the caddy (not included) or far away from the pool, so it does not get pulled in. Always use an electrical outlet protected with a Ground Fault Interrupter (GFI) device; this will protect your Dolphin from surges in power. Do not use an extension cord or surge protector to power your Dolphin.